PBR Panels The PBR panel is commonly used for a wide variety of architectural, agricultural, commercial and industrial applications. PBR is a structural panel and an exposed fastener panel that can be used for both roof and wall applications. The minimum roof slope for PBR is ½:12.
PBR Product Information: Coverage Width – 36” Rib Spacing – 12” on center Rib Height – 1-1/4” Minimum Slope – ½:12 Panel Attachment – Exposed Fastening System Gauge – 26 (Standard); 29, 24, 22 (Optional)
Standing Seam Panels Standing seam panels are available in 12-inch, 18-inch and 24-inch widths. Standing seam requires a minimum slope of ¼:12 and is ideal for industrial, commercial and architectural applications.
Standing Seam Product Information: Coverage Width – 12″, 18″, 24″ Minimum Slope – ¼:12 Panel Attachment – Concealed Fastening System; Low, High, Fixed and Sliding Gauge – 24 (standard); 22, 26 (optional)
Translate this page:
For More Information, Call Us at 1-866-720-3222 or email [email protected]
Steel Building Canada Inc., 3149 Haldimand Road 9, UNIT B York, Ontario CANADA N0A 1R0